0558:100a — GW Instek GDS-1000A Oscilloscope

This is the USB identifier for a GW Instek GDS-1000A Oscilloscope manufactured by Truevision, Inc.. The vendor ID 0558 is registered to Truevision, Inc. with the USB Implementers Forum, and 100a is the product ID that Truevision, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 0558:100a Truevision, Inc. GW Instek GDS-1000A Oscilloscope.

Linux

$ lsusb
Bus 001 Device 004: ID 0558:100a Truevision, Inc. GW Instek GDS-1000A Oscilloscope

You can filter directly with lsusb -d 0558:100a, or get the full descriptor dump with lsusb -v -d 0558:100a. Kernel messages from dmesg show the same pair as idVendor=0558, idProduct=100a.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0558&PID_100A
USB\VID_0558&PID_100A&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0558&PID_100A"

macOS

$ system_profiler SPUSBDataType
    GW Instek GDS-1000A Oscilloscope:
      Product ID: 0x100a
      Vendor ID: 0x0558  (Truevision, Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0558  Truevision, Inc.
	100a  GW Instek GDS-1000A Oscilloscope

• 0558:1009 GW Instek GDS-1000 Oscilloscope
• 0558:2009 GW Instek GDS-2000 Oscilloscope

See all 3 devices from Truevision, Inc. →