0471:0330 — SPC 710NC PC Camera
Philips (or NXP)
- Vendor ID
- 0471
- Product ID
- 0330
- Combined
- 0471:0330
- Decimal
- 1137:816
What is this device?
This is the USB identifier for a SPC 710NC PC Camera manufactured by Philips (or NXP). The vendor ID 0471 is registered to Philips (or NXP) with the USB Implementers Forum, and 0330 is the product ID that Philips (or NXP) assigned to this particular model. When you run lsusb on Linux, this device appears as 0471:0330 Philips (or NXP) SPC 710NC PC Camera.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0471:0330 Philips (or NXP) SPC 710NC PC Camera
You can filter directly with lsusb -d 0471:0330, or get the full descriptor dump with lsusb -v -d 0471:0330. Kernel messages from dmesg show the same pair as idVendor=0471, idProduct=0330.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0471&PID_0330 USB\VID_0471&PID_0330&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0471&PID_0330"
macOS
$ system_profiler SPUSBDataType
SPC 710NC PC Camera:
Product ID: 0x0330
Vendor ID: 0x0471 (Philips (or NXP))Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0471 Philips (or NXP) 0330 SPC 710NC PC Camera