03eb:2111 — Xplained Pro board debugger and programmer
Atmel Corp.
- Vendor ID
- 03eb
- Product ID
- 2111
- Combined
- 03eb:2111
- Decimal
- 1003:8465
What is this device?
This is the USB identifier for a Xplained Pro board debugger and programmer manufactured by Atmel Corp.. The vendor ID 03eb is registered to Atmel Corp. with the USB Implementers Forum, and 2111 is the product ID that Atmel Corp. assigned to this particular model. When you run lsusb on Linux, this device appears as 03eb:2111 Atmel Corp. Xplained Pro board debugger and programmer.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 03eb:2111 Atmel Corp. Xplained Pro board debugger and programmer
You can filter directly with lsusb -d 03eb:2111, or get the full descriptor dump with lsusb -v -d 03eb:2111. Kernel messages from dmesg show the same pair as idVendor=03eb, idProduct=2111.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_03EB&PID_2111 USB\VID_03EB&PID_2111&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_03EB&PID_2111"
macOS
$ system_profiler SPUSBDataType
Xplained Pro board debugger and programmer:
Product ID: 0x2111
Vendor ID: 0x03eb (Atmel Corp.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page. Atmel Corp. official support →
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
03eb Atmel Corp. 2111 Xplained Pro board debugger and programmer
More from Atmel Corp.
- 03eb:2109 STK541 ZigBee Development Board
- 03eb:210a AT86RF230 [RZUSBSTICK] transceiver
- 03eb:210d XPLAIN evaluation kit (CDC ACM)
- 03eb:2110 AVR JTAGICE3 Debugger and Programmer
- 03eb:2122 XMEGA-A1 Explained evaluation kit
- 03eb:2140 AVR JTAGICE3 (v3.x) Debugger and Programmer
- 03eb:2141 ICE debugger
- 03eb:2145 ATMEGA328P-XMINI (CDC ACM)